Products

4 Flute Skid is an accessory or replacement component for compatible inspection camera equipment.Includes Pt No: 569-252 Rear Nut for Skid.Product identification Brand: Rausch UK Product type: Inspection Camera Accessory Compatibility and supportRausch UK can help confirm compatibility and the correct component for your...

AC Adapter for DS100 Monitor is an accessory or replacement component for compatible inspection camera equipment.AC Adapter to run the DS100 Monitor in the Mini DartEye Drain Camera from mains power.Product identification Brand: Rausch UK Product type: Inspection Camera Accessory Compatibility and supportRausch UK...

Ball Skid is an accessory or replacement component for compatible inspection camera equipment.Includes Pt No: 569-252 Rear Nut for Skid.Product identification Brand: Rausch UK Product type: Inspection Camera Accessory Compatibility and supportRausch UK can help confirm compatibility and the correct component for your system...

Ball Skid 2" is an accessory or replacement component for compatible inspection camera equipment.Easy to fit, undo screws slip over camera head & screw back up.Two-piece Ball Skid for DX Mini & Mini DartEye for use in 2" pipes and above.Product informationEasy to fit,...

Brush Skids for 6“ Pipes is an accessory or replacement component for compatible inspection camera equipment.Easy to attach and remove, no tools required. Extremely robust and long lasting.6" Brush Skid Assembly.Key features 6" Brush Skids for the S/L DartEye2 & DX Drain Inspection Camera...

C.Scope 33 kHz General Purpose Sonde is a compact locating transmitter for tracing compatible rods, cameras or pipe routes from above ground.Ideal for tracing the route of non-metallic drains and ducts or pinpointing the position of a blockage, inspection point or other underground feature.Key...

C.Scope CXL3 Cable Avoidance Tool is professional locating equipment for identifying buried utilities, cables or pipe routes.Key Features Power, Radio and Generator detection modes 33 kHz Generator mode for active tracing LCD display and real audio response Retractable loudspeaker Weatherproof construction rated to IP65...

C.Scope CXL4 Cable Avoidance Tool is professional locating equipment for identifying buried utilities, cables or pipe routes.Key Features Power, Radio, Generator and AllScan detection modes Simultaneous 33 kHz + 131kHz Generator mode Overload Protection for high-interference environments AlarmZone™ shallow-service warning PeakHold for confident pinpointing...

C.Scope DXL3 Depth Measuring Cable Avoidance Tool is professional locating equipment for identifying buried utilities, cables or pipe routes.Key Features Power, Radio and Generator detection modes 33 kHz Generator mode for active utility tracing Depth measurement in Generator mode LCD indication with real audio...

C.Scope DXL4-D Cable Avoidance Tool with Data Logging is professional locating equipment for identifying buried utilities, cables or pipe routes.Key Features Power, Radio, Generator and AllScan detection modes Simultaneous 33 kHz + 131kHz Generator mode Accurate depth indication for pipes, cables and sondes Built-in...

C.Scope DXL4-DBG Cable Avoidance Tool with GPS & Bluetooth is professional locating equipment for identifying buried utilities, cables or pipe routes.Key Features Power, Radio, Generator and AllScan detection modes Simultaneous 33 kHz + 131kHz Generator mode Accurate depth indication for pipes, cables and sondes...

C.Scope MXL4-D Precision Pipe & Cable Locator is professional locating equipment for identifying buried utilities, cables or pipe routes.Key Features Power, Radio, Transmitter and AllScan modes Multi-frequency tracing: 512 Hz, 640 Hz, 8kHz, 33 kHz, 131kHz and 33+131kHz Depth measurement for lines and sondes...

C.Scope MXL4-DBG Precision Locator with GPS & Bluetooth is professional locating equipment for identifying buried utilities, cables or pipe routes.Key Features Power, Radio, Transmitter and AllScan modes Multi-frequency tracing: 512 Hz, 640 Hz, 8kHz, 33 kHz, 131kHz and 33+131kHz Depth measurement for lines and...

C.Scope MXT4-D Multi-Frequency Transmitter is a signal transmitter for use with compatible underground utility locating equipment.Key Features One-watt output with four adjustable power levels Six outputs: 512 Hz, 640 Hz, 8kHz, 33 kHz, 131kHz and simultaneous 33+131kHz Direct Connection, Wraparound and induction application methods...

C.Scope SGA3 Signal Generator is a signal transmitter for use with compatible underground utility locating equipment.Key Features 33 kHz signal output Designed for C.Scope CXL3 and DXL3 locators Direct Connection and induction signal application High and low power output settings Pulsed or continuous signal...

C.Scope SGA4 Dual-Frequency Signal Generator is a signal transmitter for use with compatible underground utility locating equipment.Key Features One-watt output with two power levels Dual-frequency 33 kHz + 131kHz output when directly connected 33 kHz induction output Direct Connection, Wraparound and induction signal application...

C.Scope SGV4-D Data Logging Signal Generator is a signal transmitter for use with compatible underground utility locating equipment.Key Features One-watt signal output with four power levels Simultaneous 33 kHz + 131kHz output Direct Connection, Wraparound and induction application methods Pulsed or continuous signal output...

Cable pulling grips for cable installation. Choose the grip size to suit the cable outside diameter.Sizes and single-unit prices Cable diameter Part number Price ex VAT 4-6 mm 250-0406 £8.63 6-10 mm 250-0610 £9.20 10-13 mm 250-1013 £10.40 13-16 mm 250-1316 £11.60 16-19 mm...

Cable pulling grips for cable installation. Choose the grip size to suit the cable outside diameter.Sizes and single-unit prices Cable diameter Part number Price ex VAT 8-16 mm 250-0816 £24.35 10-20 mm 250-1020 £25.89 15-25 mm 250-1525 £26.13 25-38 mm 250-2538 £27.76 38-50 mm...

Cable Reel Pole is a support or stand for compatible professional equipment and workpieces.The Cable Reel Pole is an easily portable cable reel holder, designed to hold a reel of cable on a 4 x 2 wall stud for convenient installation. It sets up...