Rausch UK is part of the Rausch Group
Visit Rausch International
Rausch Adviser
What can we help you with?
Tell us what you’re trying to find, solve or achieve. Ask about equipment, technical questions, service, repairs or anything else.
Yateks Realta 3D Measurement Videoscope
See the defect. Measure it. Analyse it directly on the inspection system.
The Yateks Realta 3D is a high-precision measurement videoscope designed for dimensional inspection and defect analysis inside difficult-to-access components. Dual-camera 3D technology allows engineers to measure distance, depth, area and surface profile directly on the system rather than relying on visual estimation alone.
Inspection Data You Can Measure
Realta 3D moves beyond visual inspection by providing quantitative measurement tools directly within the videoscope.
1
3D Dimensional Measurement
Measure distance, depth, area and surface profiles directly from captured 3D inspection data.
2
Dual HD Cameras
Dual-camera imaging captures the information required to reconstruct internal surfaces and evaluate defects in three dimensions.
3
Motorised Articulation
360° omni-directional motorised camera movement helps position the probe precisely around complex internal geometry.
4
Analyse on the Device
Generate and review 3D measurement information directly on the Realta system without relying on separate post-processing software.
3D Measurement
Turn Visual Defects into Dimensional Data
Instead of simply identifying that a crack, pit or surface defect exists, Realta 3D allows the inspector to quantify its dimensions.
A 3D representation of the internal surface can be generated directly on the device, allowing measurement points and profiles to be reviewed during the inspection.
Measure
Point-to-point distance
Measure
Depth
Measure
Area
Analyse
3D surface profile
Measure While You Inspect
Realta 3D is designed to give engineers usable dimensional information at the inspection point, reducing reliance on visual judgement alone.
Precision
±0.05 mm Accuracy
Manufacturer-stated measurement accuracy of ±0.05 mm supports dimensional analysis of small internal defects.
3D Data
Point Cloud Analysis
Generate high-definition 3D point-cloud information representing the inspected internal surface.
On Device
Immediate Measurement
Review and measure inspection data directly on the Realta system while carrying out the inspection.
Typical Realta 3D Applications
Realta 3D is particularly suited to inspection where the size, depth or profile of an internal defect can influence an engineering decision.
Aerospace
Engines & Critical Components
Inspect turbine blades, internal engine components and restricted surfaces where accurate defect sizing is important.
Power Generation
Turbines & Plant
Quantify internal wear, damage and surface features during planned maintenance and condition assessment.
Automotive
Precision Engineering
Measure internal features and defects in engines, castings and precision-manufactured components.
Process Industry
Maintenance & Defect Analysis
Support maintenance decisions by combining visual evidence with dimensional information from inaccessible internal areas.
Technical Specifications
Core specifications of the Realta 3D measurement and inspection platform.
Display & Control
- Display
- 7" IPS HD LCD
- Display resolution
- Up to 1920 × 1200
- Operation
- Touchscreen & physical controls
- Articulation
- Motorised 360° omni-directional
- Camera system
- Dual HD camera
- Connectivity
- USB-A, USB-C, HDMI, WLAN & Bluetooth
3D Measurement
- Accuracy
- ±0.05 mm manufacturer stated
- Distance
- Point-to-point measurement
- Depth
- Depth measurement
- Area
- Area measurement
- Surface analysis
- 3D profile measurement
- 3D output
- Point cloud & depth-map analysis
Probe Platform
- Probe diameters
- 4 mm & 6 mm
- Working lengths
- 1 m to 3 m depending on configuration
- Resolution
- Up to 1280 × 720 probe image
- Viewing
- Forward & side-view options
- Probe protection
- IP67
- Design
- Interchangeable probes & handles
Is Realta 3D Right for Your Inspection?
Realta 3D is designed for inspections where seeing a defect is not enough and accurate dimensional information is required to support the engineering decision.
Choose Realta 3D
When You Need to Measure the Defect
Choose Realta 3D where the length, depth, area or surface profile of an internal defect needs to be quantified rather than assessed visually alone.
Talk to Rausch UK →
Visual Inspection Only?
Consider the Q Series
If your priority is high-definition visual inspection with a broad choice of probe diameters and configurations, but advanced 3D dimensional measurement is not required, the Q Series may be the more appropriate platform.
View Q Series →
TECHNICAL DOWNLOAD
Realta 3D Datasheet
Download the Realta 3D technical datasheet for measurement capabilities, probe configurations and system specifications.
Yateks Realta 3D FAQs
Key information about 3D measurement, accuracy, probe configurations and choosing the right videoscope for your inspection.
What does a 3D measurement videoscope do?
A 3D measurement videoscope allows an inspector to see an inaccessible internal feature and also obtain dimensional information about it.
With Realta 3D, measurements can include point-to-point distance, depth, area and surface profile, helping turn a visual observation into measurable inspection data.
What can the Realta 3D measure?
Realta 3D supports dimensional analysis including point-to-point distance, depth measurement, area measurement and 3D surface profiling.
These functions can be used to quantify features such as cracks, pits, wear, damage and other surface defects where their dimensions are important to the inspection decision.
How accurate is the Realta 3D measurement system?
Yateks states a measurement accuracy of ±0.05 mm for the Realta 3D measurement system.
Actual inspection performance will depend on the selected probe, viewing geometry, measurement setup and inspection conditions.
Does Realta 3D require separate software to make measurements?
The Realta 3D is designed to generate and analyse 3D measurement information directly on the inspection unit.
This allows the operator to review point-cloud information and make dimensional measurements while carrying out the inspection rather than relying entirely on separate post-processing.
What probe sizes are available for Realta 3D?
Realta 3D is available with 4 mm and 6 mm probe configurations. Available working lengths range from 1 metre to 3 metres depending on the selected probe.
Forward-view and side-view configurations are available with different depth-of-field options to suit different inspection tasks.
What is the difference between Realta 3D and the Q Series?
The Q Series is primarily a configurable high-definition visual inspection platform with a broad selection of probe diameters, camera configurations and 2D comparison measurement.
Realta 3D is designed for inspections where advanced dimensional analysis is required, adding 3D point-cloud data and direct measurement of distance, depth, area and surface profile.
Interested in the Yateks Realta 3D?
Tell us what you need to inspect, the access available and the type of dimensional measurement you need to make. Rausch UK can help specify the Realta 3D probe and configuration around your inspection application.
- Choosing a selection results in a full page refresh.