Drainage & Utilities

13mm vs 18mm Drain Cameras: Which Camera Head Size Do You Need?

A 13 mm and an 18 mm camera can both inspect small pipework, but the head size, push rod and system configuration change what can physically reach the inspection point.
Rausch KK13 13 mm drain camera head Rausch KK18 18 mm drain camera head

When you are working in very small pipework, a few millimetres of camera diameter can decide whether the inspection is straightforward or impossible.

That is why the minCord range includes both 13 mm and 18 mm camera options rather than treating “small camera” as a single category.

The 13 mm option

The KK13 camera head has a 13 mm stainless-steel body, a high-resolution colour camera module, a multi-frequency 512 Hz, 640 Hz and 33 kHz sonde and a 24 mm spacer.

On the minCord 5 it is paired with a 15 m, 5 mm push-pull cable and a 5-inch recording monitor. On the minCord XL it can be paired with a 30 m, 5 mm push-pull cable and a 7-inch recording monitor.

The obvious advantage is access: where the opening itself is restrictive, the smaller head gives you the best chance of getting the camera where it needs to go.

The 18 mm option

The KK18 camera is available with the minCord XL.

It uses an 18 mm stainless-steel camera head, a 29 mm spacer, the same 512 Hz, 640 Hz and 33 kHz locating frequencies and a 30 m, 5.6 mm push rod.

The camera specification remains 560 TV lines and 0.02 Lux, while the lighting ring increases from 12 mini LEDs on the 13 mm head to 18 on the 18 mm version.

13 mm vs 18 mm at a glance

13 mm KK13 18 mm KK18
Camera diameter 13 mm 18 mm
Spacer diameter 24 mm 29 mm
Lighting 12 mini LEDs 18 mini LEDs
minCord XL push rod 30 m / 5 mm 30 m / 5.6 mm
Sonde 512 Hz / 640 Hz / 33 kHz 512 Hz / 640 Hz / 33 kHz
Available on minCord 5 and minCord XL minCord XL

So which size should you choose?

If access is the limiting factor, start with the smallest head that can give you the inspection you need.

The 13 mm camera is therefore the natural choice for the tightest openings and small-bore applications. The 18 mm option gives the minCord XL another configuration where a slightly larger head is acceptable.

The important point is to consider the entire route, not just the nominal pipe diameter. Entry points, bends, changes in diameter and the physical path to the inspection area can all matter.

minCord 5 or minCord XL?

The minCord 5 is a compact 13 mm system with a 15 m cable. If you need 30 m reach or want the choice of 13 mm and 18 mm camera configurations, the minCord XL is the more flexible platform.

View the Rausch minCord 5 →

View the Rausch minCord XL →

Explore Rausch push-camera systems →

Need help choosing the right inspection equipment?

Tell us what you need to inspect and how you work. We can help narrow down the right system, arrange a demonstration or point you towards the most relevant technical information.

Talk to Rausch UK →
Drainage & Utilities

Explore Drainage & Utilities

Explore Rausch inspection systems, cameras and solutions for drainage, sewer and utility inspection applications.

Explore Drainage & Utilities Talk to Rausch UK